镶嵌式径向滑动轴承静特性分析

分析计算了镶嵌式径向滑动轴承中油膜的压力分布、承载量、摩擦系数和流量,得出镶嵌式径向滑动轴承具有不同于普通径向滑动轴承的静特性.     

基于状态变换的数字电路冗余确认研究

以状态跳变图为基础,深入分析了冗余变换与非法变换的特征,提出结构冗余和功能冗余的概念,并讨论了可测故障、不可测故障和冗余之间的联系.最后结合验证和测试生成,提出状态冗余的隐含遍历确认策略.     

A computation procedure for the exact solution of location-allocation problems with rectangular distances

A method is presented to locate and allocate p new facilities in relation to n existing facilities. Each of the n existing facilities has a requirement flow which must be supplied by the new facilities. Rectangular distances are assumed to exist between all facilities. The algorithm proceeds in two stages. In the first stage a set of all possible optimal new facility locations is determined by a set reduction algorithm. The resultant problem is shown to be equivalent to finding the p-median of a weighted connected graph. In the second stage the optimal locations and allocations are obtained by using a technique for solving the p-median problem.     

液体火箭发动机涡轮泵健康监控系统

为了提高液体火箭发动机涡轮泵的安全性,降低其故障带来的破坏性,设计了某型液体火箭发动机涡轮泵健康监控系统(TP HMS),工程实现了TP HMS的测试硬件子系统、实时故障检测子系统、试车后数据分析子系统和实时数据库支持子系统等,讨论和分析了TP HMS的功能和执行流程,然后利用历史试车数据与转子试验平台数据对TP HMS中的多特征参量自适应阈值综合决策算法(MATA)进行了离线和实时在线验证;利用自适应时频谱对测试数据作进一步的分析。结果表明,MATA没有发生误检测情况,并具有实时故障检测的能力;自适应时频谱能有效抑制时频交叉项的干扰,准确给出故障信号的时间和频率信息。因此,TP HMS适合于液体火箭发动机涡轮泵健康状态监控。     

跳频电台自动测试系统设计

目前跳频电台的最好的检测方式是采取综合测试系统代替传统的测试仪器。以采样定理为基础,通过对三种跳频电台采样方案的比较得出结论,黑盒中频数字化方法是目前最合理的选择。给出了基于PCI总线构建跳频电台自动测试系统的硬件平台和软件测试方法。跳频电台自动测试系统可以完成对跳频电台指标的测试,并具有通用性。     

A model to predict the residual life of aircraft engines based upon oil analysis data

This paper reports on a study using the available oil monitoring information, such as the data obtained using the Spectrometric Oil Analysis Programme (SOAP), to predict the residual life of a set of aircraft engines. The relationship between oil monitoring information and the residual life is established using the concept of the proportional residual, which states that the predicted residual life may be proportional to the wear increment measured by the oil analysis programmes. Assuming such a relationship between wear and the residual life exists, we formulated a recursive prediction model for the item's residual life given measured oil monitoring information to date. A set of censored life data of 30 aircraft engines (right censored due to preventive overhaul) along with the history of their monitored metal concentration information are available to us. The metal concentration information includes many variables, such as Fe, Cu, Al, etc.; not all of them are useful, and some of them may be correlated. The principal component analysis (PCA) has been adopted to reduce the dimension of the original data set and to produce a new set of uncorrelated variables, which we shall use in the prediction model. The procedure associated with estimating model parameters is discussed. The model is fitted to the actual SOAP data from the aircraft engines, and the goodness‐of‐fit test has been carried out. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

基于ANN模式识别的某型导弹测试车配电系统故障诊断

人工神经网络诊断特点与基于模式识别的诊断特点非常相似。将ANN模式识别技术应用于某型导弹测试车配电系统故障诊断。根据测试车配电系统的故障特点,设计ANN为4层BP网络,具有9个输入、10个输出,两个隐含层神经元数目分别为9和6。测试结果表明该方法能有效诊断测试车配电系统故障。     

面阵CCD用于光场能量探测的研究

面阵CCD在光场能量探测领域具有较大的应用前景。讨论了影响CCD探测精度的特性参数,包括平均暗电流、光电响应非均匀性和非线性,设计了特性参数测试系统,给出的实验结果对CCD用于光能探测具有借鉴意义。     

故障检查间隔期的简化计算方法

建立了定期故障检查策略下系统的可用度模型,在满足系统可用度要求的条件下,可以使用该模型确定故障检查工作的间隔期。为了简化故障检查间隔期的计算,给出了故障时间服从指数分布时,故障检查间隔期的上、下限计算公式及应用示例。     

Ti含量对Ti-B4C-C体系自蔓延高温合成的影响

以14Ti+3B4C+5C为基础反应体系,通过热力学分析及静态燃烧合成实验研究了钛含量对该体系SHS反应的绝热温度、反应速度和产物致密度的影响.研究表明,Ti含量适当增加,能够使反应速度加快、产物致密度提高.当Ti过量16%(摩尔分数)时,体系的绝热温度仍高达3 193K,反应速度最快,产物的致密度也较高.